Legal Notices; Users In The U.s.a - Canon 700 Series Facsimile Manual

Legal Notices

Users in the U.S.A.

A. Location
Supply a suitable table, cabinet, or desk for the machine. See Chapter 8,
Appendix,
"
B. Order Information
1. Only a single telephone line (touch-tone or rotary) should be used.
2. Order an RJ11-C modular wall jack (USOC code), which should be installed by
the telephone company. If the RJ11-C wall jack is not present, telephone/fax
operation is not possible.
3. Order a normal business line from your telephone company's business
representative. The line should be a regular voice grade line or an equivalent
one. Use one line per unit.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas
NOTE
Canon recommends an individual line following industry standards, such as the 2500
(touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX
(Public Branch Exchange) unit without "Call Waiting" can be used with the machine. Key
telephone systems are not recommended because they send nonstandard signals to
individual telephones for ringing and special codes, which may cause a fax error.
C. Power Requirements
This machine should be connected to a standard 120 volt AC, three-wire grounded
outlet only.
Do not connect this machine to an outlet or power line shared with other appliances
that cause "electrical noise". Air conditioners, electric typewriters, copiers, and
machines of this sort generate electrical noise which often interferes with
communications equipment and the sending or receiving of documents.
in the Reference Guide for specific dimensions and weight.
"
xiii