Using Access Code Dialing - Canon 700 Series Facsimile Manual

• If you want to cancel the transmission after you press a one-touch speed dialing
key or enter a coded speed dialing code under which a group is registered, press
(Stop).

Using Access Code Dialing

Follow the procedure to start a transmission and send a document using access
code dialing.
IMPORTANT
To use this feature, you must first set ACCESS CODE to 'USE' from the SYSTEM
SETTINGS menu, and set up the access code key. (See "Setting Up the Access Code
Key," on p. 2-29.) Also, you have to register an access code when registering a telephone
number for one-touch or coded speed dialing. (See "Setting Up One-Touch Speed
Dialing," on p. 2-6, or "Setting Up Coded Speed Dialing," on p. 2-15.)
1
Place your documents on the machine.
For instructions explaining how to place your documents, see "Setting the
Document on the Machine," on p. 3-3.
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
"Adjusting the Scan Settings," on p. 3-4.)
• You can also specify a sender's name with [TTI Selector]. (See "Selecting a
Sender's Name," on p. 3-6.)
2
Press the access code key that you have set.
If you have set
If you have set the access code key to 'OTHER', press the corresponding
program one-touch key.
3
Enter the access code (from two to five digits) using the
1 2 3
4 5 6
numeric keys.
7 8 9
0
(#) as the access code key, press (#).
Using Speed Dialing 2-37
2