Table of Contents
Advertisement
1 Outline
Deleting recorded data
Chapter
Recorded data can be deleted by pressing the
1
hold value display screen.
On the displayed confirmation screen, press the
delete data or press the
Setting value display screen
In the setting value display screen, screens are displayed for each category. Confirm the current
settings and press the
Settings cannot be changed when it is locked, so be sure to release lock when changing the settings.
Refer to P.24"5-6.Calibration protection (CAL. PROT.)/ setting protection (SET. PROT.)" for
procedures to release lock.
Functions of operation keys
▲
SET
ESC
6
6
ESC
key to reset (stop) deleting.
All data will be erased when data deletion is performed.
Pay due attention when deleting because erased data cannot be restored.
After changing the minimum scale and unit settings of encoder, please delete
recorded data first.
key to change the settings.
SET
When selecting item
:
Switch category
:
Switch setting item
▼
:
To setting input status
:
Go to the main screen
ZERO
key on the
SET
key to
Precautions
During item input
:
Switch digit (not used when selecting item)
* The selected digit starts flashing.
:
Increase/decrease selected digit
▲
▼
HOLD
:
Sign + ⇔ - (not used without sign)
SET
:
Confirm input
ESC
:
Cancel
Advertisement
Table of Contents
