Average Hold - Unipulse TM400 Operation Manual

6-6.

Average hold

Holds the average value of torque.
- Operation of average hold (start mode: key)
key input
HOLD
HOLD display
Holds the average value after pressing the
Press the
Press the
- Operation of average hold (start mode: level)
key input
HOLD
HOLD display
The hold operation starts when the torque passes the start level (from above to below or from below
to above) after pressing the
passes the stop level (in the opposite direction of the start level). After the passing the stop level, the
hold data is displayed while monitoring the indicated value to pass the start level.
Press the
31
Detection/hold section
Indicated value = 0
Lights off
Flashes
HOLD
key again to confirm.
key again to stop hold operation.
HOLD
Detection/hold
section Hold fix section
Indicated value = 0
Flashes
Lights off
key. Afterwards, the hold operation continues until the torque
HOLD
key again to stop hold operation.
HOLD
Hold fix
section
Lights on
HOLD key as the indicated value.
Detection/hold
section
Lights on Flashes Lights
on
6 Hold Function
Hold release
section
Torque
Indicated value
Time
Lights off
Hold release
section
Torque
Indicated value
Start level
Stop level
Time
Lights off
Chapter
6
31