5-11.Power Off (Power Off); 5-12.Visibility (Visibility); 5-13.Version (Version) - Unipulse TM400 Operation Manual

5-11.
Power off (POWER OFF)
When the TM400 is not operated for a fixed time, it enters into the low power consumption mode.
<Setting range>
5-12.
Visibility (VISIBILITY)
This is a function to display the values for torque and rotation speed in a way that is easy to see by
averaging the display values. Only the displayed values are averaged. The data stored inside the
TM400 (graphs, hold) are not averaged.
<Setting range>
5-13.
Version (VERSION)
The version of the main unit can be confirmed.
25
0 to 10 [MIN]
Key points
If the setting is set as 0 minutes, it will not enter into the low power consumption
mode.
Furthermore, it will not enter into the low power consumption mode while using
the external power supply or during recording.
To recover from the low power consumption mode, turn on the power again or
press any key on the main unit.
OFF, L (0.5s), M (1.0s), H (2.0s)
5 Function Setting Procedures
Chapter
5
25