Calibration Protection (Cal. Prot.)/ Setting Protection (Set. Prot.); Date (Date); Time (Time); Buzzer (Buzzer) - Unipulse TM400 Operation Manual

5 Function Setting Procedures
5-6.
Calibration protection (CAL. PROT.)/
setting protection (SET. PROT.)
This function prohibits changes to settings to prevent setting and calibration values from being
changed by operational errors.
5-7.

Date (DATE)

Sets the date for the main unit.
Chapter
5
5-8.

Time (TIME)

Sets the time for the main unit.
5-9.

Buzzer (BUZZER)

Sets the buzzer.
* Buzzer refers to the key clicking sound.
5-10.
Backlight (BACKLIGHT)
The backlight is illuminated for a fixed time after pressing the key. The fixed time is set by this
function.
24
24
<Setting range> OFF, ON
Key point
Refer to P.12 "3-2.List of setting values" for setting items locked by the calibration
protection and setting protection.
<Setting range> 2000/01/01 to 2099/12/31
<Setting range> 00:00:00 to 23:59:59
<Setting range> OFF, ON
<Setting range> 0 to 600 [S]
Key points
If the time is set as 0 seconds, the backlight will be always illuminated.
The backlight time setting affects the battery hours.
The longer the backlight time, the shorter the battery hours.
If the backlight time is longer than the power off time (refer to P.25 "5-11.Power off
(POWER OFF)"), the power off time is prioritized.