Screen Configuration - Unipulse TM400 Operation Manual

▲
ESC :
SET
Power switch
This is a switch to turn ON/OFF the TM400 power supply.
UTMⅡ connection connector
UTMⅡ is connected with the dedicated cable.
Connection connector for rotary encoder
UTMⅡ rotary encoder is connected with the dedicated cable.
External power input connector
This is a jack to connect the AC adapter dedicated for the TM400.
USB connector
This connector is used to connect the product with a PC.
USB cable is sold separately.
Charge lamp
This lamp indicates the charge status of the battery. (Lighted on: charging, Flashing: error)
1-4.

Screen configuration

Main screen
Indicated value display screen
ESC
Setting value display screen
3
:
These keys are used to change commands and setting values.
:
These keys are used to change commands and setting values.
▼
This key is used to stop operation or to return to indicated value display from the
setting screen.
:
This key is used to switch to setting value display or to confirm setting values.
Graph display screen
ESC
* The same screen as the previous use is displayed
when the power is turned on.
SET
* The screen for torque setting value is displayed when the power is turned on.
In other cases, the setting value screen for the previous use is displayed.
Hold value display screen
ESC
1 Outline
Chapter
1
ESC
3