Peak Hold - Unipulse TM400 Operation Manual

6 Hold Function
6-3.

Peak hold

Holds the maximum value (peak value) of torque in the positive direction.
- Operation of peak hold (start mode: key)
HOLD
HOLD display
Holds the maximum value after the
Press the
Press the
Chapter
6
- Operation of peak hold (start mode: level)
HOLD
HOLD display
The hold operation starts when the torque exceeds the start level from below the start level after
pressing the
the torque will be fixed. After the torque falls below the stop level, the torque will be compared
with the start level again.
Press the
28
28
Detection/hold
section
key input
Lights off
Flashes
HOLD
key again to confirm.
key again to release hold.
HOLD
Detection/hold
section
key input
Flashes
Lights off
key. When the torque falls below the stop level, detection will be stopped and
HOLD
key again to stop hold operation.
HOLD
Hold fix section
Lights on
HOLD key down.
Detection/hold
Hold fix section section
Lights on Flashes
Hold release
section
Torque
Indicated value
Time
Lights off
Torque
Indicated value
Start level
Stop level
Time
Lights off