Table of Contents
Advertisement
Chapter 3 BIOS Configuration
Drive A / Drive B
These fields identify the types of floppy disk drive A or drive B that has
been installed in the computer. The available specifications are:
360KB
1.2MB
5.25 in.
5.25 in.
Floppy 3 Mode Support
This is the Japanese standard floppy drive. The standard stores 1.2MB in
a 3.5-inch diskette. You have four options to choose:
Disabled
No 3 mode floppy drive installed. (default)
Drive A
Installed 3 mode drive at drive A.
Drive B
Installed 3 mode drive at drive B.
Both
Installed 3 mode drive at drive A and B.
Video
This field selects the type of video display card installed in your system.
You can choose the following video display cards:
EGA/VGA
For EGA, VGA, SEGA, SVGA
or PGA monitor adapters.(default)
CGA 40
Power up in 40 column mode.
CGA 80
Power up in 80 column mode.
MONO
For Hercules or MDA, includes high resolution
monochrome adapters.
Halt On
This field determines whether the system will halt if an error is detected
during power up.
No errors
The system boot will not be halted for any error
that may be detected. (default)
All errors
Whenever the BIOS detects a non-fatal error,
the system will be halted and you will be
prompted.
All, But Keyboard
The system boot will not be halted for a
keyboard error; it will stop for all other errors.
All, But Diskette
The system boot will not be halted for a disk
error; it will stop for all other errors.
All, But Disk/Key
The system boot will not be halted for a
keyboard or disk error; it will stop for all other
errors.
40
720KB
1.44MB
2.88MB
3.5 in.
3.5 in.
3.5 in.
CI5TTV User's Manual
Advertisement
Table of Contents
