Table of Contents
Advertisement
Power LED and Keylock: Pins 11 - 15
The power LED indicates the status of the main power
switch. The keylock switch, when closed, will disable the
keyboard function.
Turbo LED Connector: Pins 8 and 18
There is the no turbo/deturbo function on the CPU card. The
Turbo LED on the control panel will always be on when
attached to this connector.
Reset Switch: Pins 9 and 19
The reset switch allows the user to reset the system without
turning the main power switch off and then on. Orientation is
not required when making a connection to this header.
Hard Disk Drive LED Connector: Pins 10 and 20
This connector connects to the hard drive activity LED on
control panel. This LED will flash when the HDD is being
accessed.
CI5TTV User's Manual
Chapter 2 Installations
J1 Pin #
Signal Name
11
Power LED
12
No connect
13
Ground
14
Keylock
15
Ground
J1 Pin #
Signal Name
8
5V
18
Ground
21
Advertisement
Table of Contents
