Integrated Peripherals; Ide Hdd Block Mode; Ide Primary Master/Slave Pio And Secondary Master/Slave Pio; Ide Primary Master/Slave Udma And Secondary Master/Slave Udma - Kontron CI5TTV Series User Manual

Chapter 3 BIOS Configuration

Integrated Peripherals

This option allows you to determine your hard disk configuration, mode
and port.

INTEGRATED PERIPHERALS

AWARD SOFTWARE INC.

IDE HDD Block Mode

: Enabled
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA : Auto
IDE Secondary Master : Auto
UDMA
IDE Secondary Slave UDMA : Auto
On-Chip Primary PCI IDE : Enabled
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support : Disabled
Onboard FDD Controller : Enabled
Onboard UAART 1 : Auto
Onboard UART 2 : Auto
Onboard UART 2 Mode : Standard
Onboard Parallel Port : 378H/IRQ7
Parallel Port Mode : Normal
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.

IDE Primary Master/Slave PIO And Secondary Master/Slave PIO

These fields allow your system hard disk controller to work faster. Rather
than have the BIOS issue a series of commands that transfer to or from
the disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
IDE Primary Master/Slave UDMA And Secondary Master/Slave
UDMA
This field allows your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and
Disabled.
52
ROM PCI/ISA BIOS
ESC : Quit
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
CI5TTV User's Manual
: Select Item