IDE HDD Auto Detection
This option detects the parameters of an IDE hard disk drive, and
automatically enters them into Standard CMOS Setup screen.
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
HARD DISKS
TYPE
SIZE
CYLS
Primary Master:
Select Primary Master Option (N=SKIP) : N
OPTIONS
TYPE
SIZE
CYLS HEAD PRECOMP
1 (Y)
0
0
0
NOTE: Some OSes (like SCO-UNIX) must use "N N N N ORMAL" for installation
Up to four IDE drives can be detected, with parameters for each
appearing in sequence inside a box. To accept the displayed entries, press
the "Y" key; to skip to the next drive, press the "N" key. If you accept the
values, the parameters will appear listed beside the drive letter on the
screen.
HDD Low Level Format
This option should only be used by a professional. Low-level formatting
can cause irreparable damage to your hard disk. The procedures include
selecting the drive you want to low-level format, determining the bad
tracks, and proceeding with pre-formatting.
CI5TTV User's Manual
Chapter 3 BIOS Configuration
ROM PCI/ISA BIOS
HEAD
PRECOMP
LANDZ
SECTOR
LANDZ
SECTOR
0
0
0
0
ESC: SKIP
MODE
MODE
NORMAL
55