Installing The Drivers For Windows Nt 4.0; Driver Installation - Kontron CI5TTV Series User Manual

Full-size pentium pci cpu card
Table of Contents

Advertisement

Chapter 4 VGA Driver Installation

Installing the Drivers for Windows NT 4.0

Driver Installation

Once you are in the Windows NT 4.0 environment, follow the procedures
below to install the VGA drivers in the diskette that comes with your
CPU card.
1.
Click the Start button, then go to Settings and click on Control
Panel.
2.
Click on the Display icon to start the Display Properties window.
3.
Click on the Settings tab, and then click on Display Type.
4.
In the Change Display Type window, click on Change in Adapter
Type. This will bring up the Select Device Window.
5.
In the Change Display window, click on Have Disk. Follow the
directions on the screen to supply the directory where the Windows
NT driver files are located. Then select OK, or press ENTER.
6.
Select Chips Video Accelerator from Display list provided, then
click OK or press ENTER.
7.
You will then see a warning panel about Third Party Drivers. Click
on Yes to finish the installation.
8.
Once the installation is complete, the system must be shut down and
restarted for the new drivers to take effect.
9.
When the system has restarted, the default graphics mode ( usually
640x480x256color ) has been automatically selected. Click the
Start button, then go to Settings and click on Control Panel. Click
on the Display icon to start the Display Properties window. Click on
the Settings tab. A new screen setting can be selected using either of
the following methods:
A.
Use the slide-bar in the Desktop Area to select new setting.
B.
Click on List All Modes. From the list provided, select a new
setting, then click OK or press ENTER.
Click on Test to test the newly selected graphics mode. Follow
C.
the instructions given on the screen. A test screen should
appear, followed by the Testing Mode window. Click on Yes
to continue. Click on Apply to switch to the new graphics
mode. Graphics modes are changed dynamically on NT 4.0, so
you do not need to shut down and restart for the new screen
settings to work.
62
CI5TTV User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ci5ttvCi5tt

Table of Contents