Table of Contents
Advertisement
Chapter 4 VGA Driver Installation
Installing the Drivers for Windows 95
Driver Installation
The following section describes the normal display driver installation
procedures for Windows 95. Use the following procedures when
installing the display drivers for Windows 95.
1.
Click Start, then Settings, then Control Panel.
2.
Double click on "Display".
3.
Select the "Settings" page, click the "Change Display Type" button.
4.
Click the "Change" button in the "Adapter Type" area.
5.
Click the "Have Disk" button and press "OK".
6.
Specify the path to the new driver and press <ENTER>:
Example 1: Insert the drivers disk in the A: floppy drive, and enter
A:\win95.
Example 2: Type in the name of the directory where you copied the
drivers, either on your local hard drive or on a network share.
Example 3: If you're not sure exactly where the drivers are, choose the
"Browse..." button to find them.
7.
The "Select Device" dialog box will appear. Select the adapter that
corresponds to the one you installed in your machine and click OK.
8.
Windows 95 will copy the display drivers to the proper directories
on your system.
9.
Continue choosing Close until asked to restart your machine from
the "Systems Settings Change" dialog box.
10. After the system has restarted, you can go back into the Display
applet and select alternate screen resolutions and color depths.
60
CI5TTV User's Manual
Advertisement
Table of Contents
