Table of Contents
Advertisement
Chapter 5 Intel PIIX Bus Master IDE Driver Installation
Installing the Software
This subsection describes how to install the software on a system where
Windows 95 is installed.
NOTE: Record the location of the Windows 95* directory before
installing the driver.
1.
Check the System Requirements. Windows 95* must be fully
installed and running on the system prior to running this software.
2.
Close any running applications.
3.
Remove references to installed real-mode IDE device drivers in the
AUTOEXEC.BAT and CONFIG.SYS files (especially any drivers
that control ATAPI CD-ROM and special IDE features). Use the
Notepad utility to do this.
The driver files are stored in an integrated application setup program.
This program is a Windows 95* program that allows the driver files
to be INSTALLED or DE-INSTALLED.
Execute the driver setup program.
Run SETUP.EXE.
4.
Click 'Next' on Welcome Screen to read and agree to the license
agreement. View the text file and choose File\Exit to close Notepad
and continue. NOTE: If you click 'No', program will terminate.
5.
Click 'Yes' if you agree to continue. NOTE: If you click 'No', the
program will terminate.
6.
Select 'INSTALL', to install the PIIX Bus Master IDE Device
Driver when prompted to do so.
NOTE: If the driver is currently installed on the system, SETUP will ask
you whether or not you want to continue. Follow the prompts on the
screen to Install the driver if desired.
7.
Click 'OK' to restart the system when prompted to do so.
8.
Follow the screen instructions and use default settings to complete
the setup when Windows 95* is re-started. Upon re-start, Windows
95* will display that it has found an Intel PCI Bus Master IDE
controller hardware and is installing hardware for it.
66
CI5TTV User's Manual
Advertisement
Table of Contents
