PNP/PCI Configuration
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
PNP/PCI CONFIGURATION
AWARD SOFTWARE INC.
PNP OS Installed
: Yes
Resources Controlled by
: Manual
Reset Configuration Data
: Disabled
IRQ-3
assigned to
: Legacy ISA
IRQ-4
assigned to
: Legacy ISA
IRQ-5
assigned to
: Legacy ISA
IRQ-7
assigned to
: Legacy ISA
IRQ-9
assigned to
: PCI/ISA PnP
IRQ-10 assigned to
: PCI/ISA PnP
IRQ-11 assigned to
: PCI/ISA PnP
IRQ-12 assigned to
: PCI/ISA PnP
IRQ-14 assigned to
: PCI/ISA PnP
IRQ-15 assigned to
: PCI/ISA PnP
DMA-0 assigned to
: PCI/ISA PnP
DMA-1 assigned to
: PCI/ISA PnP
DMA-3 assigned to
: PCI/ISA PnP
DMA-5 assigned to
: PCI/ISA PnP
DMA-6 assigned to
: PCI/ISA PnP
DMA-7 assigned to
: PCI/ISA PnP
PNP OS Installed
This field allows you to specify if the operating system installed in your
system is plug and play aware.
Note: Operating systems such as DOS, OS/2, and Windows 3.x do not
use PnP.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically. However, this capability needs you to use a PnP operating
system such as Windows 95. The default value is Manual.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data
or not. The default value is Disabled.
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to
These fields allow you to determine the IRQ/DMA assigned to the ISA
bus and is not available to any PCI slot.
CI5TTV User's Manual
Chapter 3 BIOS Configuration
ROM PCI/ISA BIOS
Used MEM base addr
ESC : Quit
F1 : Help
PU/PD/+/- : Modify
F5 : Old Values
(Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: N/A
: Select Item
49