Connection Examples; Rtd, 2-Wire Connection; Figure 20: Connection Example: 2 × Rtd, 2-Wire Connection - WAGO -I/O-SYSTEM 750 Manual

40 Connect Devices
6.2

Connection Examples

Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
Depiction of the I/O module with 753-110 Plug!
Information on this pluggable connection pertains to the 753-110 Plug, which is
not included with the I/O module.
6.2.1 2 × RTD, 2-Wire Connection
Figure 20: Connection Example: 2 × RTD, 2-Wire Connection
Manual
Version 1.3.1
WAGO-I/O-SYSTEM 750
753-461 2AI Pt 100/RTD