Edit Configuration File; Editable Configuration File Upload; Figure 168 Configuration File Example - ZyXEL Communications AAM1212 User Manual

Quit FTP.
ftp> quit

32.3.2 Edit Configuration File

Open the
config-0
configuration.
Note: Ensure that any changes you make to the commands in the configuration file
correspond to the commands documented in this User's Guide.

Figure 168 Configuration File Example

#### sysinfo
sys info hostname ras
sys info location taiwan
sys info contact zmlin
#### snmp
sys snmp getcommunity public
sys snmp setcommunity public
sys snmp trapcommunity 1234
sys snmp trustedhost 0.0.0.0
sys snmp trapdst 172.23.15.250
#### server
sys server enable telnet
sys server enable ftp
sys server enable web
sys server enable icmp
sys server port telnet 23
sys server port ftp 21
sys server port web 80
#### client
sys client set telnet 0.0.0.0
sys client set ftp 0.0.0.0
sys client set web 0.0.0.0
sys client set icmp 0.0.0.0
#### syslog
sys syslog enable
sys syslog server 172.23.15.240
sys syslog facility 1
#### timeserver
sys timeserver set time 172.23.15.240 utc+0800 nosync
#### watchdog
sys wdog set 10000

32.3.3 Editable Configuration File Upload

You can upload the configuration file by following the steps below.
Use an FTP client to connect to the AAM.
C:\> ftp <AAM IP address>
Chapter 32 Firmware and Configuration File Maintenance
file via notepad (see the following example) and edit to a desired
AAM1212 User's Guide
265