Intended Use - Techman Robot TM Palletizing Operator User Manual


Implementing other machines and additional risk reduction measures based on the results of the risk
assessment

Using appropriate software safety features

Ensuring Users will not modify any safety measures

Ensuring all systems are correctly designed and installed

Clearly labeling user instructions

Clearly marking the contact information for the integrator

Making relevant documents accessible, including the risk assessment, and this manual

2.6 Intended Use

The TM Palletizing Operator is designed and constructed in accordance with relevant safety standards so that
hazards can be reduced to tolerable levels when it is installed as specified and operated under normal and
intended use. TM Palletizing Operator are intended for use in material palletizing for payloads (including
end-effector and workpiece) up to the specified "Maximum Payload".
Risk assessment should be taken into consideration for any type of use or application. If the system is not used in
its intended application, The Corporation will not be liable for any injury or damage arise. The Corporation thus
clearly specifies that the following uses are not appropriate for the TM Palletizing Operator. The list is subject to
addition without prior notice.

Use in a potentially hazardous environment

Use in any applications that may threaten human lives

Use in any application that may cause personal injuries

Use before completion of the risk assessment and implementation of risk reduction measures

Use for life support

Use when the rated performance cannot be reached

Use when the reaction time of safety functions is insufficient

Use without appropriate parameters in operations

Use in applications which may cause damage to the robot itself

Restricted movement of persons

Use without proper mounting of the robot

Use involving excessive oscillations when moving

Use without proper design of earthquake-prevention mounting when installed in earthquake zones

Use without safe access to (or at/from) the work station

Use in the presence of exhaust gases/lack of oxygen at the work position

Use in the presence of flame (flammability of the cabinet, lack of extinguishing means)

Use with mechanical hazards at the work position: a) rollover; b) fall of objects, penetration by objects; c)
break-up of parts moving at high speed; d) contact of persons with machine parts or tools (non-collaborative
TM Palletizing Operator User's Manual Product Version: 1.0 / Document Version: 1.0 32