Accessories And Consumables; Opening The Processing Chamber Door During The Machining Process; Electrostatic Charge; Esd Warning Labels - Dentsply Sirona CEREC Primemill Operating Instructions Manual

Dentsply Sirona
Operating Instructions CEREC Primemill
ESD warning label
67 19 681 D3692
D3692.201.01.01.02 01.2020

4.2 Opening the processing chamber door during the machining process

4.1.4

Accessories and consumables

In order to ensure reliable, high-quality results, product safety, and
durability, our range of CEREC Primemill production units must only be
operated with original accessories and consumables from Dentsply
Sirona or approved accessories and consumables from third-party
suppliers.
In particular, only the power cable also supplied or the corresponding
original spare part may be used with the unit. The user is responsible
for any damage resulting from the use of nonapproved accessories and
consumables.
Approved accessories and consumables include grinding/milling tools,
blocks and coolants. The current selection of approved blocks and
corresponding grinding/milling tools can be found in the latest software
as well as in "Bur tables for the CEREC milling and grinding units" in the
download area at:
https://my.cerec.com
These lists are updated from time to time.
Opening the processing chamber door during
4.2
the machining process
CAUTION
Coasting tools
When the processing chamber door is opened during the machining
process, it may take a short time (approximately 2-3 seconds) for the
tools to coast to a stop.
➢ Be careful not to touch the tools with your hand or any other
object during this time.
➢ Avoid opening the processing chamber door while the production
unit is in operation.
➢ Before you open the processing chamber door, end any actions
that are running by pressing the "Stop" button on the touch
interface of the production unit or in the application software.

Electrostatic charge

4.3
4.3.1

ESD warning labels

CAUTION
Risk of injury or damage to components from electrostatic discharge
For electrical components labeled with an ESD warning label,
observe the following instructions.
➢ Apply the ESD protective measures.
➢ Do not touch connector pins or sockets without applying ESD
protective measures first.
➢ Do not establish any connections between these connectors
without applying ESD protective measures first.
4 Safety
13