Removing The Hard Disk Drive - EUROCOM TN120T Service Manual

Disassembly

Removing the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
Figure 2
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
HDD Assembly
Chapter 4 of the User's Manual) when setting up a new hard disk.
Removal
Hard Disk Upgrade Process
a. Locate the HDD bay cov-
er and remove the
1. Turn off the computer, and remove the battery
screws.
2. Locate the hard disk bay cover and remove the screws (
b. Remove the bay cover.
3. Remove the bay cover
a.
New HDD's are blank. Before you begin make sure:
You have backed up any data you want to keep from your old HDD.
3. HDD Bay Cover
You have all the CD-ROMs and FDDs required to install your operating system and programs.
If you have access to the internet, download the latest application and hardware driver updates for the operating system you plan
• 2 Screws
to install. Copy these to a removable medium.
2 - 6 Removing the Hard Disk Drive
All manuals and user guides at all-guides.com
l
.
6 3
1 2
(page 2 - 5).
-
).
1 2
b.
3
HDD System Warning