1. Manuals
  2. Brands
  3. EUROCOM Manuals
  4. Laptop
  5. 8500 DeskNote
  6. User manual

EUROCOM 8500 DeskNote User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Notice
Updating or revising this manual or making any changes to the
information herein will be initiated when the company deems it
necessary. The company reserves the right to take the above-
mentioned actions and is under no obligation to notify any person of
such actions in advance or afterwards.
1997
Trademarks
IBM PC, OS/2, PS/2, EGA, and VGA are registered trademarks of
International Business Machines Corporation.
Intel, Pentium are trademarks of Intel Corporation.
MS-DOS, Microsoft Windows, Windows NT and Microsoft Mouse
are registered trademarks of Microsoft Corporation.
Sound Blaster Pro is a trademark of Creative Labs, Inc.
SystemSoft is a registered trademark of SystemSoft Corp.
Other brand and product names are trademarks of their respective
companies.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8500 DeskNote and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EUROCOM 8500 DeskNote

Summary of Contents for EUROCOM 8500 DeskNote

  • Page 1 Notice Updating or revising this manual or making any changes to the information herein will be initiated when the company deems it necessary. The company reserves the right to take the above- mentioned actions and is under no obligation to notify any person of such actions in advance or afterwards.

  • Page 2: Fcc Notice

    FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 3: Warranty Provisions

    Warranty Provisions Keep the product’s bar code legible to protect your right for warranty services. The manufacturer warrants this personal computer to be in working order for a period of one year from the date of shipment. If this product fails to be in working order during the one year warranty period, the manufacturer will, with its option, repair or replace the product at no charge except as set forth below.

  • Page 4: Important Safety Instructions

    Important Safety Instructions Please read and follow these important instructions. 1. Follow all warnings and instructions marked on this product. 2. Unplug this product from the wall outlet before cleaning it or connecting peripheral devices. 3. Use a damp cloth with mild soap to clean this product. Do not apply cleaner directly to the unit.
  • Page 5 10. Do not allow foreign matter to enter the system. 11. Do not attempt to service this product yourself. Opening or removing covers may expose dangerous voltage points. Refer all repair work to qualified service personnel. 12. Unplug this product from the wall outlet, do not operate it, and immediately seek proper servicing if: The power cord or plug is damaged or frayed.
  • Page 6 Conventions This manual uses the following conventions to describe, identify, and highlight terms and operating procedures. Text Conventions Text in boldface contains messages that are important for safe operation. Please read. Characters in boldface represent specific items or keys, e.g. CardBus, Fn key.
  • Page 7 Ergonomics Developing good work habits is important for you if you need to work in front of the computer for a long period of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. Following are some tips to reduce the strain: ¦...
  • Page 8 Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. ¦ Position the display to avoid glare or reflections from overhead lighting or outside sources of light. ¦ Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly.

  • Page 9: Table Of Contents

    Table of Contents Chapter 1: Getting Started Unpacking ...................1-2 Operating Environment ............1-3 Quick Starting-up...............1-4 Powering the System ............1-4 AC Power Adapter ..........1-4 Battery Pack .............1-5 Inserting ............1-5 Removing ............1-5 Recharging by AC Power......1-6 Proper Handling of the Battery Pack...1-6 Opening the LCD Cover ..........1-7 Top-Front View ................1-8 LCD Panel .................1-8 Stereo Speakers...............1-8...
  • Page 10 Right-side View................1-15 PC Card Sockets..............1-15 2.5” Hard Disk Drive ............1-15 3.5” Floppy Diskette Drive ..........1-15 Speaker-out Jack .............1-15 Line-in Jack ...............1-15 Microphone-in Jack ............1-15 Ventilation................1-16 Right-side Stand ...............1-16 Left-side View ................1-17 5.25” CD-ROM Drive ............1-17 Infrared ................1-17 Left-side Stand ..............1-17 Chapter 2: Operation Upgrading CPU................2-2 Replacing CPU ..............2-2...
  • Page 11 Using CD-ROM ................2-17 Removing CD-ROM Module ...........2-18 Loading Compact Discs ..........2-19 Handling of Compact Discs ..........2-20 Using PC Card Sockets............2-21 Inserting PC Cards............2-22 Removing PC Cards ............2-22 Using Hot Keys ................2-23 Using Numeric Keypad.............2-25 Windows 95 Special Keys ............2-26 Application Key ..............2-26 Windows Key ..............2-26 TV-Output ...................2-27 LCD Panel ..................2-28...
  • Page 12 Startup Menu............3-8 Memory Menu ............3-10 Disks Menu...............3-11 Components Menu..........3-13 Power Menu .............3-16 Exit Menu..............3-19 Chapter 4: Peripheral Devices Attaching a Security Lock ............4-2 Attaching a Parallel Printer ............4-3 Attaching a TV Set ..............4-4 Attaching a Video Input Device ..........4-5 Attaching a USB-compatible Device ........4-6 Attaching a Serial Mouse ............4-7 Attaching an External Monitor (CRT) ........4-8 Attaching a PS/2 Keyboard or Mouse ........4-9...

  • Page 13: Chapter 1: Getting Started

    Chapter 1: Getting Started Chapter 1: Getting Started This chapter provides a short introduction and tutorial that will familiarize you with the Notebook system and get you up and running quickly. Unpacking ...................1-2 Operating Environment ............1-3 Quick Starting-up...............1-4 Powering the System ............1-4 AC Power Adapter ..........1-4 Battery Pack .............1-5 Opening the LCD Cover ..........1-7...

  • Page 14: Unpacking

    User’s Manual Unpacking Carefully unpack the Notebook Computer and the included accessories (Figure 1-1). If there is any discrepancy or problem, contact your dealer immediately. Be sure to save the packing materials in case you need to repack and ship the Notebook back in the future.

  • Page 15: Operating Environment

    Chapter 1: Getting Started Operating Environment As with any other precision electronic equipment, proper care and operation of your Notebook will provide long and reliable service. Be sure the computer system should not be: : Exposed to excessive heat or direct sunlight. : Subjected to shock or vibration.

  • Page 16: Quick Starting-Up

    User’s Manual Quick Starting-up Powering the System AC Power Adapter Use only the power adapter that comes with your Notebook Computer. System operation with an incorrect power adapter will cause damage to the Notebook and its components. 1. Plug the power adapter to the AC-in socket on the rear panel of the Notebook.

  • Page 17: Battery Pack

    Chapter 1: Getting Started Battery Pack The Notebook system can be powered by the battery pack for continuous portable operation without an external power source when you take it away from the office. However, the actual operating time will be dependent upon the application you use and the configuration you set.

  • Page 18: Recharging By Ac Power

    User’s Manual Recharging by AC Power The system’s battery pack will recharge whenever the system is plugged into the AC power supply, regardless if the system is being operated or not. You may connect the AC power adapter to the Notebook Computer at any time to begin recharging the system’s battery pack.

  • Page 19: Opening The Lcd Cover

    Chapter 1: Getting Started Opening the LCD Cover 1. Slide the top cover latch to the right to release the latch (Figure 1-5). 2. Lift the top cover to reveal the LCD panel and keyboard (Figure 1-6). 3. Adjust the LCD panel to a comfortable viewing angle. 4.

  • Page 20: Top-Front View

    User’s Manual Top-Front View LCD Panel The Notebook provides you with the solution of big LCD panel. Depending upon the model you have purchased, it can either be 15.1” XGA (1024x768 pixels) compatible, of TFT technology or 13.8” XGA (1024x768 pixels) compatible, of DSTN technology.
  • Page 21 Chapter 1: Getting Started Microphone LCD Panel Stereo Speakers Keyboard Status LED Indicators Trackpad and Buttons Figure 1-7...

  • Page 22: System Status Indication

    1-10 User’s Manual System Status Indication LED Indicators on the LCD Cover Icon Color Description Green Battery power is used with system turned on. AC power is used with system turned on or off. Green Battery is fully charged. Battery is being charged. Blinking Red Battery power is critically low.

  • Page 23: Led Indicators On The Top Panel

    Chapter 1: Getting Started 1-11 LED Indicators on the Top Panel Icon Color Description Green Battery power is used with system turned on. AC power is used with system turned on or off. Green Battery is fully charged. Battery is being charged. Blinking Red Battery power is critically low.
  • Page 24 1-12 User’s Manual Figure 1-9...

  • Page 25: Rear View

    Chapter 1: Getting Started 1-13 Rear View AC-in Socket Plug the AC adapter into this connector for power supply. To disconnect the power adapter, pull the plug (not the cord) directly back. Security Connector It is used to protect your Notebook from being stolen. Wrap the steel cable around your desk.

  • Page 26: External Monitor (Crt) Port

    1-14 User’s Manual External Monitor (CRT) Port This port is used for display output to an external monitor. Simultaneous display with the LCD panel is available. Dual PS/2 Type Ports External PS/2 mouse and keyboard are allowed to connect to the system via both ports.

  • Page 27: Right-Side View

    Chapter 1: Getting Started 1-15 Right-side View PC Card Sockets One Type III or two Type II PC cards may be used. Both sockets will expand the system capabilities when a PC card is inserted. To eject the PC card, press the appropriate eject button (Figure 2-17).

  • Page 28: Ventilation

    1-16 User’s Manual Ventilation The Notebook features the ventilation to dissipate the system’s operating heat. Do not block or obstruct it during operation. Right-side Stand Move this stand (together with the left one) to adjust the typing angle. If a high speed CPU is installed on the system, erecting the stands on both sides will be necessary for heat dissipation during operation (Figure 1-13).

  • Page 29: Left-Side View

    Chapter 1: Getting Started 1-17 Left-side View 5.25” CD-ROM Drive The 5.25” IDE CD-ROM module is designed to be removable from the Notebook. The eject button is located in the middle of the front cover of the CD-ROM drive. Pressing it will release the CD tray.
  • Page 30 1-18 User’s Manual Infrared CD-ROM Drive Figure 1-14 Left-side Stand Figure 1-15...

  • Page 31: Chapter 2: Operation

    Chapter 2: Operation Chapter 2: Operation The Notebook has many advanced features to help you with your computing work. This chapter describes each of the Notebook’s hardware features and shows you how to use them. Before you begin working with any internal components of the Notebook, remove the battery and disconnect the AC power adapter.

  • Page 32: Upgrading Cpu

    User’s Manual Upgrading CPU The system is capable of hosting a wide range of Intel CPUs’ speed. Upgrading your CPU will increase your computing speed. The higher the CPU speed you install, the better the system performance you get. Different CPUs may have different power voltages.

  • Page 33: Jumper Settings

    Chapter 2: Operation Jumper Settings You need to adjust the jumper settings for different CPU types. For P54C CPU Type Jumper Setting Remark JP2 short P54C See Figure 2-2 Set JP2 short by attaching the cap into it. Refer to Figure 2-2. Figure 2-2...

  • Page 34: For P55C

    User’s Manual For P55C CPU Type Jumper Setting Remark JP1 short P55C See Figure 2-3 Set JP1 short by attaching the cap into it. Refer to Figure 2-3. Figure 2-3...

  • Page 35: Setting Dip Switch

    Chapter 2: Operation Setting DIP Switch CPU Core Frequency Remove the keyboard to reveal the system’s mainboard. Locate the 10-pole DIP Switch to set the correct configuration for CPU core frequency (MHz). Pentium CPU at 3.3V I/O Voltage CPU Frequency 133 MHz On Off 150 MHz...

  • Page 36: Flash Rom Bios

    User’s Manual Flash ROM BIOS In order to keep up with the latest system BIOS, you may upgrade your Notebook system from available source, your dealer for example. Continue the process that you work with CPU processor’s clock. The DIP Switch need to be set On when you are going to update the existing system BIOS.
  • Page 37 Chapter 2: Operation Figure 2-4 Figure 2-5...

  • Page 38: Cpu Core Voltage

    User’s Manual CPU Core Voltage Locate the 8-pole DIP Switch to set the correct configuration for CPU core voltage. CPU Core Voltage 1.8 V 2.0 V 2.1 V 2.35 V 2.45 V 2.8 V 2.9 V 3.3 V Accessing DIP Switch 1.

  • Page 39: Cpu I/O Voltage

    Chapter 2: Operation CPU I/O Voltage Locate the 2-pole DIP Switch to set the correct configuration for CPU I/O voltage. CPU I/O Voltage 2.5 V 3.3 V Accessing DIP Switch 1. Turn the system power off. 2. Turn the Notebook over. 3.

  • Page 40: Expanding Memory

    2-10 User’s Manual Expanding Memory The system has two memory sockets for different RAM modules to expand the memory up to 128MB. These RAM modules are 144- pin SODIMM (Small Outline Dual In-line Memory Module) type. The Notebook supports Fast Page Mode, EDO, and SDRAM operation.
  • Page 41 Chapter 2: Operation 2-11 Bank 0 Bank 1 Figure 2-8...

  • Page 42: Installing Memory Module

    2-12 User’s Manual Installing Memory Module Follow the steps below to install the memory module: 1. Turn the system power off. 2. Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure 2-4). 3.

  • Page 43: Removing Memory Module

    Chapter 2: Operation 2-13 Removing Memory Module 1. Turn the system power off. 2. Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure 2-4). 3. Carefully lift the keyboard assembly out to expose the mainboard.

  • Page 44: Using Hard Disk Drive

    2-14 User’s Manual Using Hard Disk Drive The hard disk drive of the Notebook can be removed since it is mounted on a removable case. The case can house any 2.5” IDE hard disk drive with a height of 12.7mm. The system supports drives with capacities greater than 528MB through the Logical Block Addressing (LBA) mode.

  • Page 45: Inserting/Removing Diskettes

    Chapter 2: Operation 2-15 Using Floppy Disk Drive The Notebook comes standard with a 1.44MB, 3.5” floppy disk module. It is labeled drive A: and may be used as a boot device if properly set. You may replace the floppy disk module with the following options: 2.5”...

  • Page 46: Replacing Floppy Disk Drive

    2-16 User’s Manual Replacing Floppy Disk Drive 1. Turn the system power off. 2. Turn the Notebook over. 3. Locate the Floppy Diskette Drive latch. 4. Press the latch in the illustrated direction and slide the floppy diskette drive out of the Notebook (Figure 2-13). 5.

  • Page 47: Using Cd-Rom

    Chapter 2: Operation 2-17 Using CD-ROM The Notebook comes standard with a removable 5.25” CD-ROM module. It is labeled drive D: and may be used as a boot device if properly set. Do not disassemble the CD-ROM module. Only certified technicians should perform repairs to the CD-ROM module.

  • Page 48: Removing Cd-Rom Module

    2-18 User’s Manual Removing CD-ROM Module 1. Turn the system power off. 2. Turn the Notebook over. 3. Locate the CD-ROM latch. 4. Press the latch in the illustrated direction and slide the CD-ROM module out of the Notebook (Figure 2 -15). Figure 2-15...

  • Page 49: Loading Compact Discs

    Chapter 2: Operation 2-19 Loading Compact Discs 1. Turn on the power. 2. Press the CD-ROM eject button; the disc tray will pop out partially. 3. Pull out the disc tray. 4. Carefully load the CD on the disc tray with label-side facing up. Press it gently to e nsure it fit into place (Figure 2-16).

  • Page 50: Handling Of Compact Discs

    2-20 User’s Manual Handling of Compact Discs Proper handling of your CDs will prevent them from being damaged and ensure the accessibility of data stored on them. Hold the CD by the edges; do not touch the surface of the disc. Use clean, soft, dry cloth to remove dust or fingerprint.

  • Page 51: Using Pc Card Sockets

    Chapter 2: Operation 2-21 Using PC Card Sockets The Notebook provides system expansion capabilities with two PC card sockets (previously referred to as PCMCIA). PC cards to be inserted can be LAN, fax/modem, communication devices, or expanded memory. Both sockets support 5V/3.3V 16-bit PC cards and 3.3V 32-bit PC cards (referred to as CardBus).

  • Page 52: Inserting Pc Cards

    2-22 User’s Manual Inserting PC Cards 1. Open the access door (Figure 2-18). 2. Align the PC card with the slot and push it in firmly until it locks into place (Figure 2-19). Figure 2-18 Figure 2-19 Removing PC Cards To remove a PC card, press the appropriate eject button and the card will be ejected from its slot (please refer to Figure 2-17).

  • Page 53: Using Hot Keys

    Chapter 2: Operation 2-23 Using Hot Keys Located on the bottom-left edge of the keyboard layout is a colored Fn key. It is a special key only found on the Notebook to make key combination with other keys for easy access to system features. Hold down the Fn key while pressing other key as below: Hot Keys System Features...
  • Page 54 2-24 User’s Manual Figure 2-20...

  • Page 55: Using Numeric Keypad

    Chapter 2: Operation 2-25 Using Numeric Keypad The Notebook features a 102-key keyboard with the Numeric Keypad integrated for easy numeric data input (Figure 2-21). Figure 2-21...

  • Page 56: Windows 95 Special Keys

    2-26 User’s Manual Windows 95 Special Keys Application Key When the user presses the unmodified Application key, the application brings up the Context menu (a pop-up menu) at the current selection, much as pressing the right mouse button does in some applications today.

  • Page 57: Tv-Output

    Chapter 2: Operation 2-27 TV Output The Notebook is equipped to output video signals to a TV set through the S-video jack. Different countries use different TV broadcast standards. A TV set must comply with the appropriate standard to properly receive broadcast signals. In the United States, TV sets are built to comply with the NTSC standard.

  • Page 58: Lcd Panel

    2-28 User’s Manual LCD Panel The Notebook Computer features the LCD panel display with the followings: PCI local bus controller. 4MB video RAM (EDO type). Capability support 1024x768 (XGA) resolution DSTN/TFT display. Ability to output the video to other video display device: VGA monitor (CRT).

  • Page 59: Using Power Management

    Chapter 2: Operation 2-29 Using Power Management The Notebook system provides you with various modes to manage its power consumption while maintaining system performance. Please refer to Chapter 3: BIOS Utilities, System Configuration Utility, Power Menu for more information. Advanced Power Management (APM 1.2) The Notebook provides built-in Advanced Power Management (APM 1.2) support to reduce power consumption.

  • Page 60: Global Standby

    2-30 User’s Manual Global Standby Under Global Standby mode, the CPU clock will be stopped and most controllable peripheral devices will be powered off. If the idle timer expires before any system activity is detected, the system will transition Standby mode into Suspend mode. Suspend and Resume The system offers the ability to halt operations at extremely low power yet retain all its programming, called Suspend.

  • Page 61: Powered On Suspend (Pos)

    Chapter 2: Operation 2-31 Powered On Suspend (POS) Powered-On-Suspend mode saves the minimum power among the three suspend modes. However, it takes the shortest time to return to full operation. Resume from POS Mode The system may be resumed from Powered-On-Suspend mode by: Alarm resume (month/day/hour/minute) Modem ring Any keyboard key pressed...

  • Page 62: Suspend To Disk (Std)

    2-32 User’s Manual Suspend To Disk (STD) Suspend to Disk is a 0-volt suspend mode for system power management. STD mode saves the maximum power but takes the longest time to return to full operation. 1. Use your operating system’s FDISK program to delete all partitions of the hard disk if any already exists on the target drive.

  • Page 63: Chapter 3: Bios Utilities

    Chapter 3: BIOS Utilities Chapter 3: BIOS Utilities This chapter provides you information of Power On Self Test (POST) and shows you how to configure the system parameters through the System Configuration Utility (SCU). Power On Self Test (POST) ............3-2 POST Message: Normal Operation.......3-2 POST Message: Error Detected ........3-3 System Configuration Utility (SCU) ........3-4...

  • Page 64: Power On Self Test (Post)

    User’s Manual Power On Self Test (POST) The system BIOS (Basic Input/Output System) performs a series of Power On Self Test (POST) on system memory and key computer components every time the computer is powered on. If an error exists, the POST routine may halt execution (depending on the severity of the problem).

  • Page 65: Post Message: Error Detected

    Chapter 3: BIOS Utilities POST Message: Error Detected If an error is detected, a WARNING message will be displayed. You should either press F1 key to continue, or press Ctrl-Alt-S key combination simultaneously to enter the System Configuration Utility. SystemSoft BIOS for Intel 430TX Version 1.01 (2482-00) Copyright 1983-1996 SystemSoft Corp.

  • Page 66: System Configuration Utility

    User’s Manual System Configuration Utility The System Configuration Utility (SCU) is a ROM-based configuration utility that displays the system’s configuration status and provides users with a tool to set their system parameters. The settings are stored in non-volatile battery-backed CMOS RAM which saves the information even when the power is turned off, and retains that when the system is turned back on.

  • Page 67: Invoking The System Configuration Utility

    Chapter 3: BIOS Utilities Invoking the System Configuration Utility The System Configuration Utility (SCU) will be accessed when simultaneously press the Ctrl, Alt, and S keys. <CTRL-ALT-S> to enter System Configuration Utility The above message only lasts seconds. If you miss it, the computer will access its boot process.
  • Page 68 User’s Manual Working with the Menu Bar of the System Configuration Utility Press simultaneously the Ctrl-Alt-S key combination to enter the menu bar of the System Configuration Utility. Action Keys Used Description Activate menus Activate the System Configuration Utility. Select menu bar item Move to a menu bar item on Left arrow ( ) the left.

  • Page 69: Working With The Pull-Down Menu Of The Scu

    Chapter 3: BIOS Utilities Working with the Pull-down Menu of the System Configuration Utility When the desired menu bar item is highlighted, press the Enter key to enter the pull-down menu for values setting. Action Keys Used Description Select pull-down Move to the next pull-down Down arrow ( ) menu item...

  • Page 70: Features Of The System Configuration Utility

    User’s Manual Features of the System Configuration Utility Startup Menu Item Setting/Option Function Date and Time Day/Month/Year Set the current date and time. Hour/Minute/Second Fast Boot Enable Initialize and quickly boot the system in a few seconds by skipping certain diagnostic tests.
  • Page 71 Chapter 3: BIOS Utilities Item Setting/Option Function SCU Password Enter old Setup Set password for modifying Password SCU. Users are authorized to Enter new Setup change the SCU setting after Password entering correct password. Verify new Setup Password Enable Setup Password Figure 3-2 Startup Menu...

  • Page 72: Memory Menu

    3-10 User’s Manual Memory Menu Item Setting/Option Function Cache L1 Cache Disabled Disable the processor’s internal Systems cache. Write Back Enable the processor’s internal write-back cache. L2 Cache Disabled Disable the L2 cache controller. Write Back Enable the L2 write-back cache. Figure 3-3 Memory Menu...

  • Page 73: Disks Menu

    Chapter 3: BIOS Utilities 3-11 Disks Menu Item Setting/Option Function Diskette Drive A None Specify the drive types for the Drives 1.2 MB diskette drive A and B. 720 KB 1.44 MB 2.88 MB Drive B None 1.2 MB 720 KB 1.44 MB 2.88 MB IDE Settings...
  • Page 74 3-12 User’s Manual Figure 3-4 Disks Menu...

  • Page 75: Components Menu

    Chapter 3: BIOS Utilities 3-13 Components Menu Item Setting/Option Function COM Ports COM A I/O None Specify the COM A Settings COM1, 3F8, IRQ4 configuration. COM2, 2F8, IRQ3 COM3, 3E8, IRQ4 COM4, 2E8, IRQ3 COM B I/O None Specify the COM B Settings configuration.
  • Page 76 3-14 User’s Manual Item Setting/Option Function PS/2 Mouse Enable Enable the system’s trackpad Port or an external PS/2 mouse. Disable Disable the trackpad or PS/2 mouse if an external mouse is connected to COM A port. Microsoft Enable Enable/Disable Microsoft IntelliMouse Disable IntelliMouse support.
  • Page 77 Chapter 3: BIOS Utilities 3-15 Item Setting/Option Function TV Mode TV Encoder Disable Enable/Disable the Enable TV encoder. TV Modes PAL 800x600 Underscan Specify the TV mode Selection as NTSC or PAL. PAL 640x480 Underscan NTSC 640x480 Overscan NTSC 640x480 Underscan PAL 640x480 Overscan PAL 800x600 Overscan NTSC 800x600 Underscan...

  • Page 78: Power Menu

    3-16 User’s Manual Power Menu Item Setting/Option Function Enable Power Enable Enable/Disable all power Saving Disable saving features. Low Power Enable Enable/Disable the power Saving saving to its lowest which Disable results in max. performance but shortest battery life. Medium Power Enable Enable/Disable the power Saving...
  • Page 79 Chapter 3: BIOS Utilities 3-17 Item Setting/Option Function Suspend Power Button Power On/Off The power button is toggled Controls Function to turn the system on or to turn it off. Suspend/Resume The power button acts as a suspend/resume button for transitioning the system between a working state and the suspend mode.
  • Page 80 3-18 User’s Manual Item Setting/Option Function Advance CPU Clock Control Full Speed Specify the type of Controls Mechanism Doze Mode Processor Clock Control. Figure 3-6 Power Menu...

  • Page 81: Exit Menu

    Chapter 3: BIOS Utilities 3-19 Exit Menu Item Function Save and Exit Save the current settings and reboot the system. Exit (No Save) Exit without saving any current changes. Default Settings Restore the default settings (the original ones found in ROM). Restore Settings Restore the current setup settings to the original custom ones.
  • Page 82 3-20 User’s Manual...

  • Page 83: Chapter 4: Peripheral Devices

    Chapter 4: Peripheral Devices Chapter 4: Peripheral Devices This chapter shows you how to attach peripheral devices to the ports or jacks on the rear panel of the Notebook Computer. Attaching a Security Lock ............4-2 Attaching a Parallel Printer ............4-3 Attaching a TV Set ..............4-4 Attaching a Video Input Device ..........4-5 Attaching a USB-compatible Device ........4-6...

  • Page 84: Attaching A Security Lock

    User’s Manual Attaching a Security Lock To protect your Notebook from being stolen, the computer is implemented with a security connector. To install the security lock, wrap the cable around the desk or other immovable object. Then, insert the locking device into this security connector (Figure 4 -1). Figure 4-1...

  • Page 85: Attaching A Parallel Printer

    Chapter 4: Peripheral Devices Attaching a Parallel Printer You may connect any standard Centronics parallel printer to your Notebook through the parallel port. 1. Turn the system power off. 2. Connect the cable to the parallel port on the rear of the Notebook Computer.

  • Page 86: Attaching A Tv Set

    User’s Manual Attaching a TV Set The S-video jack on the rear panel of the Notebook is used for transmitting video signal to a TV set. You may need to select the video standard for video display. Enter the System Configuration Utility (SCU), Components Menu to specify the appropriate TV mode.

  • Page 87: Attaching A Video Input Device

    Chapter 4: Peripheral Devices Attaching a Video Input Device The RCA jack on the rear panel of the Notebook allows analog composite signals to input from external video devices. Attach the device as shown below (Figure 4-4). Figure 4-4...

  • Page 88: Attaching A Usb-Compatible Device

    User’s Manual Attaching a USB-compatible Device The Notebook implements dual USB ports for connection of USB- compatible keyboard, mouse or other devices. Attach the device as shown below (Figure 4 -5). Figure 4-5...

  • Page 89: Attaching A Serial Mouse

    Chapter 4: Peripheral Devices Attaching a Serial Mouse The serial port features a 9-pin connector. You can connect any serial device such as a serial mouse to this port. 1. Turn the system power off. 2. Connect the cable to the serial port on the rear of the Notebook Computer.

  • Page 90: Attaching An External Monitor (Crt)

    User’s Manual Attaching an External Monitor (CRT) The computer is capable of displaying information not only on the LCD, but also on XGA compatible displays that are externally attached to the computer. Information can be displayed on both the LCD and the external monitor simultaneously. Enter the System Configuration Utility (SCU) to select the appropriate parameters or toggle Fn + F6 keys (refer to Chapter 2, Using Hot Keys).

  • Page 91: Attaching A Ps/2 Keyboard Or Mouse

    Chapter 4: Peripheral Devices Attaching a PS/2 Keyboard or Mouse The Notebook can be operated with a PS/2 keyboard or mouse that is externally attached by means of the PS/2 transfer cable. Attach the external keyboard or mouse as shown below (Figure 4-8). Both PS/2 type ports on the rear panel of the Notebook can be used for the connection of PS/2 keyboard and mouse.
  • Page 92 4-10 User’s Manual...

  • Page 93: Appendix A: Specifications

    Appendix A: Specifications Appendix A: Specifications This appendix describes the features and specifications for the Notebook Computer. : CPU Intel P54C/LM. Intel P55C/LM with MMX technology. : Memory 3.3V power supply. Supports Fast Page Mode/EDO/SDRAM. 512KB secondary cache Pipeline Burst Synchronous RAM (PBSRAM).
  • Page 94 User’s Manual : Audio Sound Blaster Pro compatible. 3D stereo sound effects. Stereo full duplex support. 1MB ROM wavetable. Built-in microphone. Built-in speakers. : PC Card Sockets CardBus support. ZV (Zoomed Video) port support. Two Type II PC cards or one Type III PC card. : Input/Output Built-in trackpad (PS/2).

  • Page 95: Power Management

    Appendix A: Specifications : Power Management APM 1.2. ACPI. Global standby. Suspend and resume. : AC Power Supply AC input: 100~240VAC, 47~63Hz. DC output: 12V. Total output: 50W. : Rechargeable Battery Pack Lithium-ion battery available. Battery low warning. : Size & Weight 357mm(w)x275mm(d)x50mm(h) (14”x10.8”x1.9”).
  • Page 96 User’s Manual...

  • Page 97: Appendix B: I/O Port Pin Assignments

    Appendix B: I/O Port Pin Assignments Appendix B: I/O Port Pin Assignments Parallel Port Signal Signal Strobe# Auto Linefeed# Data 0 Error# Data 1 Initialize# Data 2 Select In Data 3 Data 4 Data 5 Data 6 Data 7 ACK# Busy Paper Empty Select...

  • Page 98: Monitor Port

    User’s Manual Monitor Port Signal Signal Signal BRED BGREEN DDCDA BBLUE DHSYNC DVSYNC DDCLK Dual PS/2 Type Ports Signal Signal EKDA EMDA EKCLK EMCLK Dual USB Ports Signal Signal USB VCCA USB VCCB USBP0- USBP1- USBP0+ USBP1+ S-video Jack Signal Signal CVBS XLUMA...
  • Page 99 Appendix B: I/O Port Pin Assignments PC Card Sockets Socket A: Signal Signal Signal A CD3 A CA5 A CA19 A CD4 A CA4 A CA20 A CD5 A CA3 A CA21 A CD6 A CA2 A VCC P A CD7 A CA1 A CE1# A CA0...
  • Page 100 User’s Manual Socket B: Signal Signal Signal B CD3 B CA5 B CA19 B CD4 B CA4 B CA20 B CD5 B CA3 B CA21 B CD6 B CA2 B VCC P B CD7 B CA1 B CE1# B CA0 B VCC P B CA22 B CA10...

Table of Contents