Sokkia CX Series Operator's Manual page 266

34. WARNING AND ERROR MESSAGES
Incorrect Password
Input password does not match set password. Input correct password.
Insert USB
USB memory device is not inserted.
Invalid USB
Incorrect USB memory device is inserted.
Invalid baseline
During setting-out line measurement or point projection measurement,
baseline has not been defined correctly.
Memory is full
There is no more room to enter data.
Record the data again after deleting unnecessary data from the JOB or
coordinate data from the memory.
Need 1st obs
During missing line measurement, the observation of the starting position was
not completed normally.
Sight the starting position accurately and press [OBS] to perform the
measurement again.
Need 2nd obs
During missing line measurement, the observation of the target was not
completed normally.
Sight the target accurately and press [MLM] to perform the measurement
again.
Need offset pt.
Observation of the offset point during offset measurement was not completed
normally.
Sight the offset point accurately and press [OBS] to perform the
measurement again.
Need prism obs
During REM measurement, the observation of the target was not completed
normally.
Sight the target accurately and press [OBS] to perform measurement again.
New password Diff.
Passwords input when setting a new password do not match.
Input the same password twice.
256