Sokkia CX Series Operator's Manual page 252

33. CHANGING THE SETTINGS
V obs. (vertical angle display method)
Sheet mod (Selecting target)
The target can be changed by selecting the option under "Target" in the
EDM Settings, or by pressing {SHIFT} in the screen where the target
symbol is displayed. The selection items can be preset to "Prism/Sheet/N-
prism (reflectorless)" or "Prism/N-prism (reflectorless)".
Ofs V ang
Select whether the vertical angle is fixed in the angle offset measurement.
Instrument Configuration
Select "Instr. Config" in Config mode
• "Guide pattern" is displayed only when guide light is selected.
Items set and options (*: Factory setting)
Power off
Reticle lev
Contrast
Resume
EDM ALC
Guide pattern
242
Zenith
Power off
Reticle lev
Contrast
Resume
EDM ALC
Guide pattern
5min, 10min, 15min, 30min*, No
0 to 5 level (3*)
0 to 15 level (10*)
On*, Off
Hold, Free*
1 (the red and green lights flash
simultaneously)*/2 (the red and green lights
flash alternately)
Horiz
: 30min
: 3
: 10
: On
: Free
: 1
Horiz 90°