Sokkia CX Series Operator's Manual page 225

2. Select "JOB selection".
<JOB selection> is displayed.
3. Press [LIST].
• JOB can also be selected by
pressing { }/{ }.
• The numbers to the right
represent the number of data
items in each JOB.
• "*" means that the JOB has not
been output to an external
device yet.
4. Align the cursor with the desired
JOB as the current JOB and press
{ENT}.
The JOB is determined.
5. Press {ENT}.
<JOB selection> is restored.
6. Align the cursor with "Coord
search JOB" and press [LIST].
<Coord search JOB> is displayed.
7. Align the cursor with the desired
JOB as the coordinate search
JOB and press {ENT}.
The JOB is determined and
<JOB> is restored.
• The list of JOB names is contained on up to 2 pages.
29. SELECTING/DELETING A JOB
JOB
JOB selection
JOB details
JOB deletion
Comms output
Comms setup
J O B s e l e c t i o n
:
J O B 1
C o o r d s e a r c h J O B
: J O B 1
L I S T
215