Sokkia CX Series Operator's Manual page 53

2. Press [
of OBS mode screen.
The Bluetooth module in the CX
powers on and connection starts.
The Bluetooth icon indicates
communication status.
"5.2 Display Functions"
• When "Mode" in "Bluetooth setup" is set to "Slave", the establishing of a
connection can only be initiated from the "Master" Bluetooth device.
• When "Mode" in "Bluetooth setup" is set to "Master", CX will attempt to
establish a connection with the designated Bluetooth device (specified in "Link"
in "Bluetooth setup").
• Softkeys (in OBS mode)
]:Press to enter waiting status ("Mode" is set to "Slave")/establish a
[
connection ("Mode" is set to "Master")
[ ]:Press to cancel the connection/exit waiting status ("Mode" is set to
"Slave")/stop establishing or cancel a connection ("Mode" is set
to "Master")
• Audio tones
(While connecting/disconnecting)
Start paging/waiting:
Connection successfully established:
Connection canceled/being canceled:
Paging failed/waiting time out:
(While inquiring about other Bluetooth devices)
New device discovered:
Inquiry complete:
• After a certain period of time has passed since Bluetooth communication is
interrupted, the CX's Bluetooth function is automatically turned OFF.
10. CONNECTING TO EXTERNAL DEVICES
] in the fourth page
OBS
SD
ZA
HA-R
OBS
SD
ZA
HA-R
short beep
long beep
two short beeps
two short beeps
short beep
long beep
4
4
43