Sokkia CX Series Operator's Manual page 50

10. CONNECTING TO EXTERNAL DEVICES
6. Set "Authentication". Select "Yes"
or "No".
7. Set "Passkey". Set the same
passkey as that for your Bluetooth
device.
• Up to 16 numeral characters can
be input. "0123" is the factory
setting. Input characters will be
displayed as asterisks (e.g.
"*****").
• "Passkey" setting is not
necessary when
"Authentication" is set to "No".
• Set other parameters according to
the communication settings for the
device you are using.
Output format and command
operations: "Communication
manual"
Bluetooth connections
• Communication between a pair of
Bluetooth devices requires one device to be set as the "Master" and the
other as the "Slave". To initiate connections from the CX side, set the CX
as the "Master" device. To initiate connections from the paired device side,
set the CX as the "Slave" device.
PROCEDURE Registering Bluetooth companion devices
1. Select "Comms setup" in Config
mode.
2. Set "Wireless" to "Yes".
40
A C K / N A K
C R , L F
A C K m o d e
: N o
: N o
: S t a n d a r d