Sokkia CX Series Operator's Manual page 157

3. Enter the start point name and
press {ENT}.
• When [LIST] is pressed, a list of
instrument stations saved in the
current JOB is displayed. A point
from this list can be recalled and
used.
For using softkeys in this
screen, see "13.1 Entering
Instrument Station Data and
Azimuth Angle PROCEDURE
Reading in Registered
Coordinate Data"
• Enter values manually when
there are no coordinates saved
for the specified instrument
station.
Press [OK] to proceed to step 4.
4. Enter the point name of the
backsight station for the start point
and press {ENT}.
When there are saved coordinates
for the backsight station, the
calculated azimuth angle is
displayed.
• Enter values manually when
there are no coordinates saved
for the specified start point
backsight station.
Press [OK] to display the
calculated azimuth angle.
24. TRAVERSE ADJUSTMENT
T r a v e r s e s t a r t p t .
O c c :
B s :
A z m t h :
< N u l l >
LIST
O c c T - 0 0 0 1
O c c T - 0 0 0 2
O c c T - 0 0 0 3
O c c T - 0 0 0 4
O c c T - 0 0 0 5
FIRST
...P
O c c :
P T T- 0 0 0 1
LOAD REC
T r a v e r s e s t a r t p t .
O c c : T - 0 0 0 1
B s :
B S
A z m t h : < N u l l >
LIST
T r a v e r s e s t a r t p t .
O c c : T - 0 0 0 1
B s : T - 0 0 0 Z
A z m t h : 3 5 7 2 7 ' 4 6 "
OK
LAST SRCH
<Null>
OK
OK
OK
147