Sokkia CX Series Operator's Manual page 147

PROCEDURE
1. Observe the starting position and
target.
"21.1 Measuring the
Distance between 2 or more
Points"
2. After measuring the targets, press
[MOVE].
Press [YES].
• Press [NO] to cancel
measurement.
3. The last target measured is
changed to the new starting
position.
Perform missing line
measurement.
"21.1 Measuring the
Distance between 2 or more
Points".
21. MISSING LINE MEASUREMENT
MLM
SD 20.757m
HD 27.345m
VD 1.012m
MOVE REC
MLM
Move 1st meas ?
SD
ZA
HA-R
MEAS MLM
NO YES
137