Edm Settings - Sokkia CX Series Operator's Manual

33. CHANGING THE SETTINGS
US survey feet are units used in surveys by the U.S. Coast and Geodetic
Survey and are referred to as "US feet" in this manual.
When "feet" or "inch" is selected in "Dist", the "Feet" item will appear on the
screen as below. When "meter" is selected, this item will not be displayed.
Results displayed in feet will differ according to the unit selected in this item.
Date and time
Select "Date and time in Config mode
Date: Entry example
Time:Entry example:

33.2 EDM Settings

The following explains the EDM settings.
• "*": Factory setting
Press [EDM] in the second page of OBS mode.
Illum.hold: Laser
• [0ppm]: Atmospheric correction factor returns to 0 and temperature and air
pressure are set to the default values.
246
F e e t
Date and time
Date: Jan / 01 / 2012
Time: 16:44:38
July 20, 2012 → 20120720 (YYYYMMDD)
2:35:17 p.m. → 143517 (HHMMSS)
f e e t
I n t . f e e t