Cross Section Survey - Sokkia CX Series Operator's Manual

26. CROSS SECTION SURVEY

The purpose of this function is to measure and set out points along a cross-
section of a road or linear feature already surveyed using the route surveying
function. Cross-sections can be surveyed in a variety of directions depending on
your requirements.
For terminology: "25. ROUTE SURVEYING"
Cross section
Target point
Sta pitch
BP
• EDM setting can be done in the cross section survey menu.
Setting items: "33.2 EDM Settings"
PROCEDURE
1. In the second page of OBS mode
screen, press [MENU], then select
"Xsection Survey".
2. Select "Occ.orien" in <Xsection
Survey> and enter instrument station
data
"13.1 Entering Instrument
Station Data and Azimuth Angle"
190
Centerline
Sta..ing
Cross-section
being observed
Xsection Survey
Occ.Orien.
Xsection Survey
EDM
Change of
observation direction
EP