Wedging The Front Wheels; Antifreeze Solution For Tyre Filling - Zetor FORTERRA HSX 120 Operator's Manual

Hide thumbs Also See for FORTERRA HSX 120:
Table of Contents

Advertisement

Wedging the front wheels

Before lifting the rear wheels do not forget to
secure the tractor against moving by wedging the
front wheels.

Antifreeze solution for tyre filling

An antifreeze solution may only be used for filling tyres if you have purchases additional
tubes! Caution, the tractor is equipped with tubeless tyres by the manufacturer!
Water for
Calcium
solution
chloride
preparation
CaCl
(l)
(kg)
45
11.8
45
13.9
45
15.4
Solution preparation:
1. Dry calcium chloride CaCl
2. The solution is not dangerous, but it is necessary to work carefully with it. Remove spilt drops with clean
water.
3. Before filling leave the solution to cool down. Observe the prescribed quantity of hydrated lime.
4. The solution must not get in contact with metal parts and the electric installation! The solution is not
harmful for the tube valve.
5. The antifreeze solution with the above mentioned composition must not be used in the cooling system!
6. After draining dispose of the antifreeze liquid as special waste!
172
BALLAST WEIGHTS
Hydrated lime Solution
2
(kg)
0.21
0.23
0.25
is added to water, never the other way round!
2
Freezing
density at 20°
point approx.
C
(°C)
1.13
-18
1.18
-25
1.21
-30
FHD20S5N050
Total volume Added
weight
(l)
(kg)
50
57
50
59
50
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forterra hsx 130Forterra hsx 140

Table of Contents