Fuels, coolants and lubricants used - amounts
No.
Filling point
MODEL
1
RADIATOR
2
ENGINE
3
TRANSMISSION CASE
4
FRONT AXLE
5
FINAL DRIVE CASE(B)
6
BALL JOINT
7
FUEL TANK
The manufacturer does not take responsibility for any damages caused by the usage of
service fillings that do not comply with requirements stated in this service manual.
Recommended SAE viscosity grades for engine oil
A - Viscosity
B - Temperature
ZETOR service fillings
To maintain best operational characteristics of your tractor, original operational Zetor fillings are
recommended to be used.
Motor oils
Engine oil Zetor 10W-40 L-SAPS
Oil in the gearbox and final drivehousing
Oil for gearing mechanisms of tractors ZETOR EXTRA 10W30 STOU
Oil for the front driving axle
Oil for the front axle ZETOR LS 80W
Other recommended service fillings tested on Zetor tractors
Oil to gear systems of tractors
1 - RPM Tractor Hydraulic Fluid or Textron TDH Premium (CALTEX)
2 - TDH Oil or TDH Oil special (TEXACO)
3 - Chevron 1 000THF (CHEVRON)
Fuel
Diesel oil complying with the regulation of EN 590
94
MAINTENANCE INSTRUCTIONS
Fillings
50/50 : Ethylene Glycol/Water (L.L.C)
ASTM D4985 / D6210
API : CH4 grades
Recommended SAE viscosity grades
A: Viscosity
B: Temperature
(API GL-4 Grades)Gear oil #80 or #90
(API GL-4 Grades)Gear oil #80 or #90
(API GL-4 Grades) Gear oil #80 or #90
Grease
Diesel fuel
Quantity Liter (gal.)
UTILIX HT45/ HT55
8.5 l (2.24 US gal)
8.2 l (2.16 gal)
35 l (9.24 US gal)
10 l (2.64 US gal)
As required
60 l (15.85 US gal)
U18N068