Lowering Speed Control Knob For The 3 Point Hitch; Exterior Hydraulic Lever (Optional) - Zetor UTILIX CL Operator's Manual

Lowering speed control knob for the 3 point hitch

This knob controls the downward speed of the hydraulics
three point linkage and positioned at the front of the
driver's seat.
To slow the downward speed - turn the knob clockwise.
To increase the downward speed, turn the knob
anticlockwise.
To lock the knob clockwise.
Do not over tighten the knob.
Caution: Always set the knob to lock when
1. Traveling on the road
2. Replacing tires or blades on an implement.
3. Making adjustments to an implement. Sudden dropping of an implement due to hydraulic
problems can cause serious injury or death.

Exterior hydraulic lever (Optional)

1 - A
2 - B
Move the lever up or down and hold. This will raise or
lower the implement. (Rotavator or hydraulic plow)
Lever will return to neutral by itself.
Position Type
1 Double-acting
2 Double-acting
W/Floating and detent
Important:
Do not hold the lever in the ''pull'' or ''push'' position once the remote cylinder has reached the end of the
stroke. As this will cause oil to flow through the relief valve. Forcing oil through the relief valve for extended
periods will overheat the oil.
When using the tractor hydraulic system to power front loader, do not operate the boom and bucket cylinders
simultaneously.
CONTROLS, INSTRUMENTS & OPERATIONS
Remark
55
UCL18N031_1
UCL18N032