Starting The Wires-X Software; Communication Port Setting - Yaesu WIRES-X FT3DE Instruction Manual

Starting the WIRES-X software

1. Double-click the [Wires-X] icon on the PC desktop.
・Setting the Internet access security (Only when Windows Security Alert screen appears)
If the Windows Security Alert window appears when starting
WIRES-X software, click [Allow access] to allow Internet
access from the WIRES-X software.

Communication port setting

When starting the WIRES-X software for the first time or when the communication port is changed, the "COM port
setting" window will appear. Set the communication port with the transceiver connected to the PC.
1. Connect the transceiver to the PC using the SCU-55, SCU-56, SCU-19 or SCU-20 PC connection cable. For details
on the connection procedure, refer to "
2. Click [▼] in the "Serial Port Selection" column and click the
COM port (displayed as "Prolific USB-to-Serial Comm Port
(COMX)") connected to the transceiver.
• A communication port may
"Serial port number specify
number directly.
• Click the [Device manager] to open the Windows Device
Manager.
3. Click [OK].
The communication port may be changed from the [File (F)]
menu - [Communication port] of WIRES-X software.
Connect the transceiver and the PC" (page 12).
also
be selected by clicking
"
and entering the COM port
16