Printing All Data Belonging To The Record; Managing Record Data - Innomed Medical HeartScreen 80G-L1 User Manual

you can return to the catalog without deleting the record. You can use the buttons
instead of DEL and ESC.

11.3. Printing all data belonging to the record

Pressing the or
be printed in the following order:
1. 12-channel ECG record by lead groups.
2. Special group leads separately.
3. 1-channel rhythm record at 5mm/s speed.
4. Rhythm analysis if created.
5. Average curves, analysis and diagnosis results.
(Stored only in case of creating diagnosis successfully.)
Pressing any button again aborts printing. If the length of the record is set 0 in Settings menu,
it will not be printed.

11.4. Managing record data

By pressing the ' ' (ENTER) button, you can enter the submenu at the bottom of the display.
The record displayed in inverse in the record list can be selected and viewed in details with
the ' ' (ENTER) button.
The top rows contain the stored record serial number and the patient identifier with the record
date and time.
The bottom of the display shows the record related data:
 0-, 4- or 8-second 12-channel ECG record (on the figure: 4s ECG)
 0-, 4- or 8-second Spec. group record (on the figure: 8s 'Spec' group)
 0-, 16-, 20-second, 1-, 5- or 10-minute rhythm record (on the figure: 16s rhythm)
If the rhythm period is 1 minute or longer, the rhythm record also contains rhythm
analysis. When using Innobase, transferring a record also means the transfer of the
rhythm analysis to the PC.
 Analysis and diagnosis results, if successfully created.
(on the figure: Analysis + diag.)
As usual, use the up and down arrows
(ENTER) button to select them. Further management as follows:
40/61
HS80G-L1 Users' Manual
button in the Catalog main menu, all stored data of the recorder will
to move among the data, and use the '
and
'
R-7317-2-B