Program Selection - Innomed Medical HeartScreen 80G-L1 User Manual

Leads are printed in 3 groups, but obviously the record is made at the same time, of all
groups.
Length of records can be set in the 'Settings/Printing/Auto length' menu point, to 2, 4 or 6
second length.
If pre-start (Settings / Printing / Pre-start) is enabled, the signal section prior to the button
push is also printed. This way it is possible to print also the signal already appeared on the
display. (In case of 2-second pre-start it means that only the 2 seconds prior to the start of
printing is printed.)
Printing is automatically aborted by pressing the
have been printed. In case of 2-second length set, the printout looks like as follows:

8.6.8. Program selection

During monitoring, the following programs are used.
In case of complete software configuration, the device can perform 3 different types of
programmed measurements.:
 storage (STORE),
 analysis/diagnosis creation (DIAG), and
 rhythm analysis (ARTM).
Programs can be started by pressing the respective keys.
26/61
HS80G-L1 Users' Manual
or the keys, or after the 12 channels
R-7317-2-B