Entering Identifier (Patient Code And Name) - Innomed Medical HeartScreen 80G-L1 User Manual

HS80G-L1 Users' Manual
The amplitude and time parameters, and the diagnosis result printed:

Entering identifier (patient code and name)

12.
After selecting Patient ID submenu in the main menu (
followed by or by
pressing ) the following appears on the screen:
'. Entering the appropriate
The new identifier can be given by the softkey numbers or with'
identifier, we can save the code with ' ', then we return to the main menu. Be careful, as the
' ' can be found elsewhere than in the main menu or in the catalogue! Pressing the ' ' for a
longer time, results in deleting a character. With the button, located on the bottom
line in the middle, we can delete a character, too. If we do not enter an identifier, the device is
AUTO and a number identifier is added to the recorded signal. The entered identifier is
applied to the next printing and/or storage. After you either enter a new identifier or AUTO is
applied, a four-digit number will be the identifier. This number automatically increases when
running a STORE or DIAG program. When you print, the identifier does not change.
The Name label can be seen in the middle of the screen, above and under which there can be
found two icons: a keyboard and a telephone.
46/61 R-7317-2-B