Installation instructions
4.
The device is delivered in a carrying case, which contains the accessories and the manuals.
Please after unpacking the device, act according to the followings.
Before turning the device on please:
Read the users' manual of the electrocardiograph and get familiar with the control
locations and functions.
Make sure that the device and the related cables and connections are undamaged.
Connect the patient cable to the HeartScreen 80G-L1 device.
For battery charging, connect the charging adapter to the mains and to the (14)
battery charging connector, located on the back side of the device (see figure on
.
page 15.)
Load printing paper into the ECG device according to the description of Section
no. 4.2.
4.1.
Battery related tasks
The device measures the battery charge state during operation and in case of low
charge it displays a battery symbol in the top-left corner of the display.
If there is no indication, battery charge state is appropriate.
If the device cannot be turned on, battery must be charged for at least 10-20 minutes.
The device battery can be continuously charged with the charging adapter, it cannot
cause any damage; however it is recommended to abort charging by unplugging the
adapter from the mains overnight or when the device is left unattended.
If the device is not used and automatic shutdown is set to 5 minutes in the
'Settings/Other' menu, the device will automatically turn off after 5 minutes.
However, battery charging still continues!
The "charge" indicator is located in the top left corner of HeartScreen 80G-L1
keyboard.
To preserve battery capacity it is recommended to format the battery semi-annually.
To format the battery, completely discharge the battery by disabling the automatic
shutdown feature in the 'Settings / Other / Shutdown' menu item, then fully charge the
battery with its own charging adapter for at least 2.5 hours.
12/61
HS80G-L1 Users' Manual
R-7317-2-B