Starting The Program - Innomed Medical HeartScreen 80G-L1 User Manual

Analysis data:
 heart rate;
 QRS length in ms;
 P-Q distance in ms;
 Q-T distance in ms;
 Q-Tc distance in ms;
 P-wave angle in degrees;
 QRS angle in degrees;
 T-wave angle in degrees;
 P+ amplitude, positive and P-, negative P-wave in mV, separately for all 12 channels;
 Q-wave amplitude, separately for all 12-channels;
 R and R'-wave amplitude, separately for all 12 leads;
 S-wave amplitude, separately for all 12 leads;
 S-T level in mV, separately for all 12 channels;
 T+ amplitude, positive and T-, negative T-wave, separately for all 12 leads;
 Qd, Q-wave length in ms, separately for all 12 leads.
You can find detailed description about the decision categories of the diagnosis program in
Appendix no. 1.
Besides the above, depending on the settings, the following ECG records are stored:
 from 12 ECG channels 0, 4, 6 or 8-second long records,
 0, 4-, 6- or 8-second long record from the Spec. group,
 and a constant length 16-second rhythm record from an arbitrarily set channel.
The storage parameters can be modified in the Settings / Diagnosis menu point.
Warning!
For the device to correctly determine the heart rate, stable ECG signal has to appear on
the display at least 2 seconds before starting storage.

9.2.1. Starting the program

Press the key during monitoring to start the selected program.
The device does not make a diagnosis if the KPAC4 type cable is connected, because all 12
leads are required for the diagnosis.
If there is no enough free memory to store the results, the program will not start and the
following warnings appear on the display:
Press the 'BLOCK' button to make it disappear and return the device to monitoring mode.
Delete a few records from the Catalog, so that you can create new records. (Section no. 11.2)
30/61
HS80G-L1 Users' Manual
No enough free memory!
Press the Block button!
R-7317-2-B