Innomed Medical HeartScreen 80G-L1 User Manual page 58

Guideline and manufacturer's statements – electromagnetic compatibility
Guideline and manufacturer's statement – electromagnetic noise
HeartScreen80G-L1 was manufactured for use within the electromagnetic environment stated below.
Buyer or user of HeartScreen80G-L1 must ensure that the unit is operated within this environment.
Noise emission test
RF emission
CISPR 11
RF emission
CISPR 11
Guideline and Manufacturer's statement – electromagnetic noise tolerance
was
HeartScreen80G-L1
below. Buyer or user of HeartScreen80G-L1 must ensure that the unit is operated within this
environment.
Test for disturbance
tolerance
Elektrostatic
discharge (ESD)
IEC 61000-4-2
Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Voltage drop, short-
term power
interruptions and
electrical fast
transients on mains
cable
IEC 61000-4-11
58/61
HS80G-L1 Users' Manual
emission
Conformity
1st group
Class B
manufactured for use within the electromagnetic environment stated
As per IEC 60601
Test level
± 6 kV contact ± 6 kV contact
± 8 kV air ± 8 kV air discharge
discharge
± 2 kV on mains ± 2 kV on mains
cable cable
± 1 kV on ± 1 kV on
input/output cable input/output cable
± 1 kV differential ± 1 kV differential
mode mode
± 2 kV common ± 2 kV common
mode mode
<5% U <5% U
T
(>95% voltage (>95% voltage drop
drop compared to compared to U
U ) for a period of 0,5
T
for a period of 0,5 40% U
40% U (60% voltage drop
T
(60% voltage drop compared to U
compared to U ) for a period of 5
T
for a period of 5 70% U
70% U (30% voltage drop
T
(30% voltage drop compared to U
compared to U ) for a period of 25
T
for a period of 25 p <5% U
Electromagnetic environment - guideline
HeartScreen80G-L1 absorbs RF energy only
for its internal operation: Therefore RF emission
is very low, and it is not probable that it would
influence the operation of other electric devices.
HeartScreen80G-L1 can be used in any
institutions directly connected to non-residential
and residential low Voltage network.
Level of
conformity environment - guideline
Floor covering must be
made of wood, concrete or
tile. If the floor covering is
made of plastic, relative
humidity must be
minimum 30%.
Quality of mains energy
must comply with the
average of commercial or
hospital environment.
Quality of mains energy
must comply with the
average of commercial or
hospital environment.
Quality of main energy
T
must comply with the
) average of commercial or
T
hospital environment. If
the user of
T
HeartScreen80G-L1
requires continuous
)
T
operation in case of power
interruption
T
recommend to use
HeartScreen80G-L1 with
)
T
USP or
machine from battery
T
Electromagnetic
, we
operate the
R-7317-2-B