Table of Contents
Advertisement
Blocking, together with initialization, takes 6 seconds if pre-start is enabled and 4 seconds if it
is disabled. More details on pre-start can be found in the section describing manual and
automatic printing.
While the „
" message appears in inverse form in the middle of the display, and the
BLOCK
"Wait..." message written normally, then monitoring continues:
Blocking works during monitoring and printing, during storage and diagnosis creation it is
disabled.
8.6.6. Starting manual printing
Manual on-line printing can be started by the
sensitivity, and status of filters) are identical to the current monitoring parameters. The lead
group (3 channel) displayed on the screen will be the one to be printed.
Groups in case of standard lead:
I, II, III
aVR, aVL, aVF
V1, V2, V3
V4, V5, V6
Leads selected within the spec. group
(In case of this group, name of the lead will appear on the display in inverse form.
Members of the group can be set in the Settings/Spec lead menu point.)
Cabrera lead group can also be selected in the Settings/Others/Leads menu point.
In case of Cabrera, the groups are as follows:
aVL, I, -aVR
II, aVF, III
R-7317-2-B
HS80G-L1 Users' Manual
key. On-line printing parameters (speed,
23/61
Hide quick links:
Advertisement
Table of Contents
