4.2.
Printer installation, paper loading
Before first use, or if the printer has run out of paper, a new roll of recording paper should be
placed into the printer. Its steps are as follows:
1. After pushing the button indicated by the arrow, open the paper bin cover.
2. Place a new roll into the paper bin. The roll should be placed with the paper's rasterred
side facing the printer head and the display.
3. Close the paper bin cover in a way that at least a few centimeters of the paper hangs
out:
4. Press and hold the "REC" button to make sure the paper runs smoothly without
creases.
With the above, the device is ready for operation.
R-7317-2-B
HS80G-L1 Users' Manual
13/61