Areas Of Use; Device Identification; Shipping And Storage Requirements; Packaging - Innomed Medical HeartScreen 80G-L1 User Manual

2.3.

Areas of use

HeartScreen 80G-L1 ECG device is dedicated to indoor applications, it can be used in GP
practices, in hospitals, clinics and in all the fields, where monitoring of patients' ECG signal
is needed. Application of HeartScreen 80G-L1 ECG device has no any contraindications.
The device was made for continuous operation, but in case of noisy ECG signal, printer-head
overheating might limit continuous printing. HeartScreen 80G-L1 device cannot be used for
any purposes contradicting its intended use.
2.4.

Device identification

The product label serves for the identification of HeartScreen 80G-L1 ECG device. The
product label contains all the data specified by Section no.7 of EN60601-1:2007 standard and
the 13.3 point of the 93/42/EEC COUNCIL DIRECTIVE supplement no. II. Manufacturer
applies the standard specified symbols on the product label.
2.5.

Shipping and storage requirements

For short-term storage the electrocardiograph must be stored in a closed place, at temperatures
0C – 45C and max. 80% relative humidity (at 25C). Air of the place should not contain
any contamination that can cause corrosion.
If the above conditions cannot be met, the device must be stored in its shipping packaging or
in a similar method. Individual devices are shipped in a carrying case, inside a closed
cardboard box with protective packaging.
If the electrocardiograph was not under operating conditions for a longer period – for example
it was stored at lower temperatures –, keep it in a normal operating environment for at least 4
hours.
To preserve battery capacity it is recommended to format the battery semi-annually. for this,
completely discharge the battery by disabling the automatic shutdown feature in the 'Settings
/ Other / Shutdown' menu point, then charge the battery full with its own charging adapter for
at least 2.5 hours.
During shipping the device must be placed into its original factory packaging – carrying case,
cardboard box.
2.6.

Packaging

The device is shipped in a carrying case, also containing the accessories. The carrying case
can be used to transport the device. During the usage make sure that the accessories are
always placed into their own place and the cables are not tangled.
R-7317-2-B
HS80G-L1 Users' Manual
9/61