Managing Ecg Record - Innomed Medical HeartScreen 80G-L1 User Manual

11.4.1.
After selecting the stored record (
it is displayed as follows.
You have the following options:
 to set the speed (with the button
of the record (with the button
 to switch the filters (with the button
 to change the lead (with the button
As the record can be longer than what fits on the display,
use the left and right arrow buttons (
display. The bottom line of the display shows the start and
end time of the displayed section.
Press the button to print the group of the displayed
channel.
Warning!
The heart rate stored during printing and sent to the printer is the average heart frequency
for 10 seconds prior to starting the program, so it may deviate a little from the value that
can be measured on the printout.
The lead-group (3 channels) containing the channel on the display is printed. The groups are:
 I, II, III
 aVR, aVL, aVF
 V1, V2, V3
 V4, V5, V6
In case of selecting Cabrera, the Cabrera groups can be changed. The printing features (speed,
sensitivity and filter state) are the same as the current curve-display features.
Press the button to print all the stored curves for the 12 channels in groups of 3 channels.
The print format is the same as in case of manual and automatic printing.
Press the button
the filter function is available; press the button
R-7317-2-B
HS80G-L1 Users' Manual

Managing ECG record

, followed by
)
) to scroll on the
to return to the previous menu level (there is no 'ESC' button here, since
)
) and sensitivity
);
).
to return to monitoring).
41/61