Operation With Command Line; Overview; Getting Started With Your 130-Smhr/9 - Reftek 130-SMHR/9 User Manual

Rev A

2 Operation with command line

Overview

This section provides information on the following topics:
•
Getting started with the 130-SMHR/9 and quick power up.
•
Minimum hardware configuration.
•
General operation with command line control.
•
DAS control with the command line.
•
Port settings and modem communications.
•
General GPS operations.
•
Example configuration with a command set
•
Format Media
•
Sample LED displays

Getting started with your 130-SMHR/9

This introductory material provides the following:
•
A brief procedure to establish minimal hardware connections for the recorder in order to
perform an initial system power-up.
•
External cables required.
•
Minimum hardware connection and power-up.
•
A procedure to specify an abbreviated set of operating parameters, start and verify data
acquisition, and save collected data to a file.
These instructions do not provide you with the detailed comprehensive information you need to
prepare your recorder for field deployment and 'real' data collection. The complete process to
establish all hardware connections, select and implement parameters, and perform data
acquisition is only outlined in this section for rapid familiarization. Refer to the 130 Command
Line Reference and 130 Command Line Theory of Operation for more information. The SMCC
Users Guide also supplies useful information operation of the 130-SMHR/9.
Reftek Systems Inc.
REF TEK 130-SMHR/9 Users Guide
98060-00-UG
5/6/2021
15