Checking Status Of A Media Device On 130-Smhr/9 - Reftek 130-SMHR/9 User Manual

Rev A

Checking status of a media device on 130-SMHR/9

1. To check status of a device, based on the most recent MF command, on the 130-SMHR/9, enter the
following:
{MF,92CB,RQ
2. The response indicating "In Progress" or busy is sent on receipt of the command and will be based on
the last MF command:
}MF,92CB,D1,INPG
3. After some time issue another media format request command to see the OK response.
Note: Formatting a disk may take some time depending on the size of the disk. It may take several media format
requests to see the OK response.
{MF,92CB,RQ
}MF,92CB,D1,OK
Reftek Systems Inc.
REF TEK 130-SMHR/9 Users Guide
98060-00-UG
Request status of the most recent MF command
Response indicating device is busy
(Last command still in progress)
Response indicating device is OK
(Last command completed successfully)
5/6/2021
29