Disk Access Information - Reftek 130-SMHR/9 User Manual

Rev A

Disk Access Information

301:09:14:20 AUTO DUMP CALLED
Indicates that RAM has reached the operator specified used amount and
the DAS enables the RAM to Disk transfer.
357:10:55:02 IDE device: IBM-DSCM-11000 S/N: KHLZ9250 fw: SC2IC915
Specifies the disk device the RAM will be dumped to.
(Used in early development code only).
301:10:57:45 AUTO DUMP COMPLETE
Indicates RAM memory was successfully transferred to disk.
323:05:58:41 ERTFS PENOSPC: Write failed
Indicates the disk being written to had an error.
(Used in early development code only).
305:02:37:22 DISK FORMAT
Indicates the operator has requested a disk format and
the DAS reports the format has happened.
305:03:25:33 AUTO DUMP FAILED
Error given when RAM was not transferred to disk when commanded to do so. The reason could be no disk is
present or hardware used to transfer RAM to CPU board to disk has a problem.
Reftek Systems Inc.
REF TEK 130-SMHR/9 Users Guide
98060-00-UG
5/6/2021
71