Setting The Stitch Length Adjusting Wheels - Dürkopp Adler M-TYPE H867 Service Manual

8 Setting the stitch length adjusting wheels

Figure 16: Stitch length adjusting wheels
(1) - Key for the stitch length on the
The two adjusting wheels on the machine column determine the stitch
length.
• Upper adjusting wheel: larger stitch length
• Lower adjusting wheel: smaller stitch length
On the lower adjusting wheel, it is not possible to set a larger stitch length
than on the upper adjusting wheel.
To switch over between the stitch lengths: Press the key for the stitch
length on the machine arm (1).
If the upper adjusting wheel is activated, then the key (1) lights up.
Upon switching on the machine, the stitch length adjusting wheel acti-
vated most recently is always active.
An automatic switchover to the upper adjusting wheel is made when you
switch the machine off at the main switch.
Sequence
Set the upper stitch length adjusting wheel first and then the lower stitch
length adjusting wheel.
24
machine arm
Setting the stitch length adjusting wheels
+/– +/–
(2) - Upper stitch length adjusting wheel
(3) - Lower stitch length adjusting wheel
Service manual H867 Version 00.0 - 08/2013
12