Table of Contents
Advertisement
Positioning the toothed belt wheels
Figure 15: Setting the lower toothed belt wheel
Setting steps
1. Loosen the setscrews (4).
2. Turn the lower toothed belt wheel (3) such that the setscrews (4) are
3. Move the lower toothed belt wheel (3) to the side such that the toothed
4. Tighten the setscrews (4).
Service manual H867 Version 00.0 - 08/2013
(1) - Toothed belt
(2) - Retaining ring
seated on the surface of the arm shaft.
belt (1) makes contact with the retaining ring (2), without being pushed
away.
(3) - Lower toothed belt wheel
(4) - Setscrews
23
Advertisement
Table of Contents
